Supplied with a free MB36-3m torch, 5m intercon and reg.

Operators Manual

Every Oxford welding machine is offered with the following guarantees:
2 year warranty all items - except torch and regulator.
20 year minimum guarantee of spares availability

Please call for a great deal !

Features

• Compact MIG welder with a separate wire feeder 
• Can accept a spool guns for better aluminium welding
• MMA ARC
• Can accept a TIG torch for DC welding applications
• Infinitely variable weld power from 20A to 410A with precision to 1A and 0.1V
• Digital display shows set and precise values prior to welding
• Super smooth low spatter MIG welding, instant arc starts with no popping
• Unique ARC TUNE control allows full control over welding characteristics from CV to CC
• Unique ARC TUNE for variable inductance, fine tune the arc precisely, dial out spatter
• Reversible polarity ,2T and 4T function, adjustable burnback, adjustable gas post flow
• Auto compensation for extension cables up to 100M or poor mains supply
• Generator friendly with built in surge protection
• Low standby power consumption of just 12-20W
• High duty cycle
• Cooling chamber keeps dirt away from electronics
• Low weight
• Industrial machine built to to work hard for 25 years + 
• Quiet running

Please call for a great deal !

Further Reading

If you are considering a MIG welder then the choice is often between a transformer based machine on wheels or a inverter based machine. For workshop use a good European made transformer based basic MIG machine with simple switches to control the output power has been the sensible choice for many applications. (Commonly referred to as step voltage or transformer type machines). They are generally cost effective, reliable, perform well, have a long life span. Also a good quality basic MIG machine is quite electrically efficient in design (around 77% for most OXFORD MIG models). 
However recent UK & EU legislation now requires efficiency to meet 80% for single phase or 85% for 3 phase welding power sources. Also required is low  power consumption on standby & there are additional rules regarding spares availability.
Our OXFORD machines have always been built to stand the test of time, simple, rugged & reliable so we always used copper wound traditional transformers for every machine. However the new legislation means we can no longer make most transformer based welding sets, its just not quite possible to get to the minimum efficiency needed. 
Oxford new inverter machines are totally unique in design & build. Firstly, we always want to make solid reliable equipment built to last. So Oxford inverter machines are made using only two IGBT power modules (transistors) with minimal PCB's & small parts, also no microprocessors are used. (fewer parts = higher reliability). Our PCB's have very high creepage & clearances between tracks & parts to maximise reliability in damp dirty conditions. We also use a separate cooling chamber to keep dirty airflow away from electronics. OXFORD inverters are very simple in construction & can be maintained by any competent Technician anywhere in the world (no electronic degree or inverter experience needed).